4 5 A B 6 CLEANING THE WATER TRAP Disassemble the top and bottom compo- nents of the water trap by pulling them apart. Rinse the two components under warm running water. You may use mild non-abrasive soap, des- caling agents and a nylon scouring pad if these are suitable for household use. ASSEMBLING THE WATER TRAP After cleaning, reassemble the top and bottom components. The water trap has been correctly reassembled when the two components have ‘clicked’ into place. If the water trap has not been correctly assembled, it may result in an unpleasant odour emanating from the drain or hinder water from flowing freely through the system. WATER TRAP AND GRATING REINSERTION When the water trap has been reassem- bled, it can be reinserted in the outlet unit. Push the water trap back into the floor drain to ensure that it is level with the drain edge. Before replacing the water trap, it is a good idea to lubricate the rubber gasket with some washing up liquid/soap so it more easily reinserts and is easier to remove next time you wish to clean it. Lay the grating back in place in the frame.
Download PDF file