Page number 1

J W e a t t W er a C sh le w an a i t n e g r c H le o a s n e ing hose Hose dim. 3/8" 5/16" 3/8" 1/2" Item no. hose 53250-06 53400-05 53400-06 53400-08 Insert type Serie K Serie K Serie K Serie K Marking K-06 K-05 K-06 K-08 Crimping dia. 19,8 19,0 21,0 24,8 Insertion Depth 25,5 23,5 25,5 29,0 Crimping chart Insertion Depth: The insertion dept are stated in the crimping chart. Mark the hose with a line at stated depth. Push the insert all the way, so the edge of the ferrule gets parallel with the marking. Crimping control steps: Inspect the crimping dimension in the die-set area as indicated in the picture. Take four measurements across the crimped ferrule at 45° to each other using a vernier calipers in the middle section of the crimped length of the ferrule. Verify that all four measurements are according to the designated crimping diameter. Tolerance 0/-0,2 mm. Inspect the crimp taper values Measure the diameter at the top of the ferrule and at the bottom of the ferrule (see picture). Verify that the ferrule taper satisfies the following limits: Taper ≤ 0,3 mm for hose size upto and including 5/8 inch. Marketing/bvs/28.10.2022