TORQUE DRIVERS Torque Drivers are ideal for low torque applications and are available in adjustable torque, torque preset and torque limiting models. ± 6% Accurate ATECHMS80M ATECHMS80F Approaching Target Target Achieved Over Torque TechAngle ® Screwdriver • Four alert modes (LCD, LED, Audible, Vibratory) • Advanced features: programmable sleep timer, cycle counter, overload indication, calibration alert, battery level, language selection and torque record memory including 10 presets and storage for up to 50 records • Three modes of operation: Torque, Angle, Torque Then Angle • Displays in 6 units of measure: in-lb., in-oz., ft-lb., Nm, Kg-cm, cNm, angle • G uaranteed accuracy +/- 2% CW and 3%CCW at 20%-100% full scale (+/- 4%CW and 6% CCW at 5% to 19% of full scale) Torque Limiting Driver • C am over torque limiting clutch free wheels when set torque is achieved • Ideal selection for assembly line work where same requirement is constant • Pin retains the socket to the square drive • Freewheels 90° when specified torque is obtained, competitive units without this freewheeling feature can cause overtorquing of the fasteners • Torques only in the clockwise direction; accuracy within ± 6% from 20–100% full scale • New textured body provides a non-slip grip • Comfortable ergonomic tri-lobe grip prevents the device from rolling off a flat surface and being damaged • Lightweight yet rugged construction • Easy-to-read torque setting Model QDRIVER2A QDRIVER3A QDRIVER4A QDRIVER4NMA Preset Preset Preset Preset Range 20-100 in-oz (14–70 N•cm) 3-15 in-lb (34–169 N•cm) 5-40 in-lb (56–451 N•cm) 50-450 N•cm Increments 1 in.-oz. 0.2 in.-lb. 0.5 in.-lb. 5 N•m Length 5 7/16" 6 1/4" 6 11/16" 6 11/16" Model ATECHMS80F ATECHMS80M Drive 1/4" Female Hex Drive 1/4" Male Drive Range 4-80 in.-lbs. (0.45-9 Nm) 4-80 in.-lbs. (0.45-9 Nm) Increments 0.01 in. lbs. 0.01 in. lbs. Length 7 1/2" 7 1/2" QDRIVER2A Preset & Adjustable Torque Screwdrivers QPDRIVER3 QPADRIVER3 PRESET • Ergonomically friendly: requires only 18 degrees of rotation to achieve preset torque value Other brands require 36 degrees, 45 degrees, or even 60 degrees to achieve target torque • Ideal for use in field maintenance kits electro-static discharge compliant when ESD practices are used • Clutch releases automatically when preset torque attained no overtorquing • Long shaft allows operator to reach limited-access applications • Accuracy of +/- 6% (from 20% to 100% of capacity) meets or exceeds ASME B107.300 - 2010 and ISO 6789 requirements • Bi-directional versatility CW and CCW operation ADJUSTABLE • Ergonomically friendly: requires only 18 degrees of rotation to achieve torque value Other brands require 36 degrees, 45 degrees, or even 60 de- grees to achieve target torque • Perfect for assembly of electronic components and precision mechanical products • Ideal for use in field maintenance kits electro-static discharge compliant when ESD practices are used • Clutch releases automatically when torque attained no overtorquing • Long shaft allows operator to reach limited-access applications • Accuracy of +/- 6% (from 20% to 100% of capacity) meets or exceeds ASME B107.300 - 2010 and ISO 6789 requirements • Bi-directional versatility CW and CCW operation • Manually set desired torque using the easy to read scale • Torque is adjustable by using the adjustment knob on the end of the tool • Includes FREE certification from our ISO/IEC 17025 Accredited calibration laboratory Model QPDRIVER2 QPDRIVER3 QPDRIVER4 Preset Preset Preset Range 20-100 in-oz 4-20 in-lb 5-40 in-lb Capacity, Nm 10-70 cNm .33-1.65 Nm .8-4 Nm 15 Length 6” 6" 6" Model QPADRIVER2 Adjustable QPADRIVER3 Adjustable QPADRIVER4 Adjustable Range 20-100 in-oz 4-20 in-lb 5-40 in-lb Capacity, Nm 10-70 Nm .33-1.65 Nm .8-4 Nm Length 6" 6" 6"
Download PDF file