Emergency Troubleshooting Methods for tire repair 1 Make sure that the switch is off at this time. Loosen the glue tube on the tire repair glue pot, align and horizontally push the glue pot interface to the glue pot bayonet on the pump body, and then connect the inflation tube to the glue pot after installation is completed. 3 Insert the inflator pump power connector into the on-board power socket, and start the vehicle. 2 Connect the glue tube to the flat tire. 4 Turn on the power switch (black), start injecting the glue solution into the tire, at this time, the value on the pressure gauge will first rise and then slowly reduce to the flat tire pressure; turn off the power switch after the tire pressure reaches the recommended value (please see "Wheels and tires" in General Technical Parameters section), and then pull out the glue tube, inflation tube and power connector in sequence. 130
Download PDF file