7. Place the Pliers so that the Insertion Pin ends up in the slot at the top of the Pliers. 8. The image to the left shows the Pliers with a stabilizing slot for the head of the Insertion Pin. The picture on the right shows the inser- tion pin inserted correctly into the Pliers. 9. Apply compression force to the handle of the Pliers until the Analog is pulled into posi- tion. 10. Remove the Pliers from the Insertion Pin. 11. Unscrew the Insertion Pin from the Ana- log. The analog isnow completely installed and ready to use. 12. If desired, secure with the Insertion Screw by mounting it in the Analog from the bottom of the 3D printed model. a) c) b) 13. a) Insertion Screw. b) Socket wrench at the back of the Pliers. c) Insertion Screw mounted onto the Pliers. 14. Place the Insertion Screw in the socket wrench of the Pliers. 15. The socket wrench has a magnetic feature which will keep the Insertion Screw securely in place. 16. Use the Pliers to gently place the Insertion Screw in the bottom hole of the Analog. 17. Rotate the Pliers clockwise until the Inser- tion Screw is fully screwed. The torque app- lied to the Insertion Screw must not exceed 5 Ncm. (Screw lightly). 18. Remove the Pliers and the installation pro- cedure is done. The Analog is now perfectly seated in the 3D printed model. 021.401 ver4
Download PDF file