MOUNTING INSTRUCTION FREESTANDING CLICK-IN SYSTEM (PART TWO) ADDING A SECTION AND ASSEMBLE A DOUBLE-SIDED SOLUTION ADDING AN ADDITIONAL SECTION Repeat the process with feet and upright – and then place the additional upright with the front of the feet facing the current section. ASSEMBLING A DOUBLE-SIDED SOLUTION Assemble the foot to the upright (in the same way like for a single-sided solution) Then slide in and mount the “backside” foot with a leveller. Attach the stabilization bars in the hole. Twist out the added upright so that the stabilization bars lock. Place the end caps (and center caps if you have more than one section) on top of the uprights. Repeat with the second upright. Then attach the stabilization bars in an “X”, with the upright sections placed as a “T”. Then twist to make the two uprights/feet parallel. BOTTOM WIRE SHELF If you are adding a Wire shelf at the bottom (on top of the foot), use the special designed clips to attach the shelf on front and back. REMEMBER TO FINETUNE Make sure to finetune the height of the feet (with the included wrench) in order to have your system level. © 2022 Elfa International AB. L Nygatan 7, SE-211 38 Malmö, Sweden. All rights reserved. Art. nr 1234567. Ver. 1
Download PDF file