MOUNTING INSTRUCTION CLICK-IN SYSTEM TOP HANG (PART ONE) Top hang is one of the mounting options within the Click-in system. Everything hangs on the Top track. Screw the Top track onto the wall. Hang the hang standards on the track and click in your storage functions. Complement with the features you need for storage to fit e.g. clothing, garage or laundry room. Since the Click-in system Top hang is able to cut-to-size, it’s ideal for virtually any space where the wall is conventional. The only thing you need to attach to the wall is the Top track. You need the following to assemble your solution: • Screwdriver/drilling machine • Saw (if adding sections and/or adjusting section widths) • Leveller Before assembling, make sure you have chosen the right screw/plug for your wall type. START WITH THE TOP TRACK 15 mm The top track must be mounted at least 15 mm from the ceiling with the curved edge downwards. Place the top track at desired height, mark one hole in the middle. Drill a hole and fasten the top track with a screw and tighten it enough to hold the top track against the wall. Place a level on the top of the top track and adjust it as required. Mark all remaining holes. CONNECTING TOP TRACKS – ADDING STANDARD-SIZED SECTION(S) If you wish to connect two top tracks, start by mounting the longer piece of track ( A ) on the far left. A. B. Before you mount the connecting top track ( B ), you’ll need to cut and remove the end stop on the left side of the track – there’s a marking 35 mm from the edge indicating where to make the cut. Cut at marking © 2022 Elfa International AB. L Nygatan 7, SE-211 38 Malmö, Sweden. All rights reserved. Art. nr 1234567. Ver. 1
Share
Download PDF file